Pioneer VSX-421 - Manual (Page 8)

Controls and displays 01
8
En
01
Remote control
As for operating other devices, the remote control codes for
the Pioneer products are preset. The settings cannot be
changed.
1 SLEEP
Press to change the amount of time before the receiver
switches into standby (
30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP once.
2  RECEIVER
Switches the receiver between standby and on.
3
Switches the remote to control the receiver (used to select
the white commands above the number buttons
(
MIDNIGHT, etc)). Also use this button to set up surround
sound (page 26) or Audio parameters (page 24).
4 INPUT SELECT
Use to select the input source (page 18).
5 Input function buttons
Use to select the input source to this receiver (page 18). This
will enable you to control other Pioneer components with the
remote control.
• ADAPTER button is not used with this receiver.
6 Receiver control buttons
PHASE – Press to switch on/off Phase Control (page 23).
S.RETRIEVER – Press to restore CD quality sound to
compressed audio sources (page 23).
SIGNAL SEL – Press to select the audio input signal of the
component to play back (page 18).
7 Listening mode buttons
AUTO/DIRECT – Switches between Auto surround mode
(page 22) and Stream Direct playback (page 23).
STEREO – Press to select stereo playback (page 22).
ALC/STANDARD SURR – Press for standard decoding
and to switch between the modes of
2 Pro Logic II, 2
Pro Logic IIx and NEO:6, and the Auto level control stereo
mode (page 22).
ADV SURR – Switches between the various surround
modes (page 23).
Press BD first to access:
BD MENU* – Displays the disc menu of Blu-ray Discs.
8 System Setup and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (
BD, DVD,
etc.).
Press first to access:
AUDIO PARAMETER – Use to access the Audio options
(page 24).
SETUP – Press to access the System Setup menu
(page 26).
RETURN – Confirm and exit the current menu screen.
Press BD, DVD or DVR/BDR first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press TUNER first to access:
TUNER EDIT – Memorizes stations for recall (page 19),
also used to change the name (page 20).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 19).
PTY SEARCH – Use to search for RDS program types
(page 20).
9 /// (TUNE /, PRESET /), ENTER
Use the arrow buttons when setting up your surround sound
system (page 26). Also used to control Blu-ray Disc/DVD
menus/options.
Use
TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
(page 20).
10 Component control buttons
The main buttons (
, , etc.) are used to control a
component after you have selected it using the input function
buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (
BD,
DVD, DVR/BDR and CD). These buttons also function as
described below.
BD DVD
INPUT SELECT
SOURCE SLEEP
TV
CONTROL
DIMMER
TV
INPUT
1
4
7
MIDNIGHT
HDD
CH
RECEIVER
DVR/BDR CD CD-R
ADAPTER TUNER PORTABLE
PHASE SIGNAL SEL S.RETRIEVER
BD MENU
ENTER
ADV SURR
AUTO/
DIRECT
VOL
+10
2
5
8
SPEAKERS LEV
LEV
SB CH
DISP
CLR
TEST TONE
DVD
3
6
9
0 ENTER
CH
CH
CH SELECT
VCR
SHIFT
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
BAND
MENU
HOME
MENU
SETUP PTY SEARCH
TRE BASS
TOP MENU
RECEIVER
TUNE
TUNE
P R E S E T P R E S E T
RECEIVER DTV/TV
ALC/
STANDARD STEREO
1
2
12
13
14
15
16
3
4
6
5
7
8
9
10
11
17
RECEIVER
RECEIVER
VSX-421_SYXCN_En.book 8 ページ ２０１１年２月９日 水曜日 午後４時１２分