Menu operations identical for function, Settings/audio adjustments/initial settings/lists, Tuner – Pioneer DEH-6300SD User Manual
Page 5: Operating this unit 02, Operating this unit
Menu operations identical
for function settings/audio
adjustments/initial settings/
lists
Returning to the previous display
Returning to the previous list/category (the folder/
category one level higher)
1 Press
/
DISP/SCRL.
Returning to the main menu
Returning to the top tier of the list/category.
1 Press and hold
/
DISP/SCRL.
Returning to the ordinary display
Canceling the initial setting menu
Returning to the ordinary display from the list/cat-
egory
1 Press BAND/ESC.
Tuner
Basic Operations
Selecting a band
1 Press BAND/ESC until the desired band (FM1,
FM2, FM3 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1 Push M.C. left or right.
Seeking
1 Push and hold M.C. left or right, and then re-
lease.
You can cancel seek tuning by pushing
M.C.
left or right.
While pushing and holding
M.C. left or right,
you can skip stations. Seek tuning starts as
soon as you release
M.C.
Note
This unit
’s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to the next
page).
Using PI Seek
If the tuner cannot find a suitable station, or the
reception status deteriorates, the unit automati-
cally searches for a different station with the
same programming. During the search,
PI seek
is displayed and the sound is muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during preset
recall.
! The default setting for Auto PI Seek is off.
Refer to
AUTO PI (auto PI seek) on page 10.
Storing and recalling stations
for each band
Using preset tuning buttons
1
When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2
Press one of the preset tuning buttons (1
to 6) to select the desired station.
# You can also recall stored radio stations by push-
ing
M.C. up or down during the frequency display.
Using the preset screen
1
Press
to switch to the preset screen.
2
Use M.C. to store the selected frequency
in the memory.
Turn to change the preset number. Press and
hold to store.
3
Use M.C. to select the desired station.
Turn to change the station. Press to select.
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio stations.
% Press
/DISP/SCRL.
Program service name
—PTY information—Fre-
quency
# PTY information and the frequency appear on the
display for eight seconds.
PTY list
NEWS/INFO
NEWS (News), AFFAIRS (Current affairs), INFO
(Information),
SPORT (Sports), WEATHER (Weath-
er),
FINANCE (Finance)
POPULAR
POP MUS (Popular music), ROCK MUS (Rock
music),
EASY MUS (Easy listening), OTH MUS
(Other music),
JAZZ (Jazz), COUNTRY (Country
music),
NAT MUS (National music), OLDIES
(Oldies music),
FOLK MUS (Folk music)
CLASSICS
L. CLASS (Light classical), CLASSIC (Classical)
OTHERS
EDUCATE (Education), DRAMA (Drama), CUL-
TURE (Culture), SCIENCE (Science), VARIED (Var-
ied),
CHILDREN (Children
’s), SOCIAL (Social
affairs),
RELIGION (Religion), PHONE IN (Phone
in),
TOURING (Travel), LEISURE (Leisure), DOCU-
MENT (Documentaries)
Advanced operations using
special buttons
Receiving traffic announcements
Regardless of the source you are listening to, you
can receive traffic announcements automatically
with TA (traffic announcement standby).
1 Tune in to a TP or enhanced other network’s
TP station.
2 Press TA/NEWS to turn traffic announcement
standby on or off.
3 Use M.C. to adjust the TA volume when a traf-
fic announcement begins.
The newly set volume is stored in the memory
and will be recalled for subsequent traffic an-
nouncements.
4 Press TA/NEWS while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA/NEWS is
pressed again.
Using news program interruption
When a news program is broadcast from a PTY
code news station, the unit automatically switches
to the news broadcast station. When the news
program ends, reception of the previous program
resumes.
1 Press and hold TA/NEWS to turn news pro-
gram interruption on or off.
A news program can be canceled by pressing
TA/NEWS.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
English
Operating this unit
02
5
Section
Operating this unit
En