Getting started 04 – Pioneer DVR-5100H-S User Manual

Page 36

Advertising
background image

Getting started

04

36

En

Note

• When using the simultaneous play and record

feature, the display shows information for playback
only.

• During real-time copy, the copy source playback

information is displayed.

• If

Frame Search

is

On

(see

Frame Search

on

page 106), the frame number is shown next to the
elapsed time display when the disc is paused.

• Transfer rate shows the amount of video and audio

information recorded on the disc. It is not an
indication of picture/audio quality.

• The Video mode disc displays become the same as a

DVD-Video disc once the disc is finalized.

• The total recording time figure shown in parenthesis

is calculated based on a 12cm/4.7GB disc at the
displayed record setting.

• Recording and playback times for TV recordings are

approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.

Copy Once

or

Can’t Record

messages may appear

in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.

DVR-03_HDD_EU.book 36 ページ 2003年9月16日 火曜日 午後12時23分

Advertising