Braun Multiquick 7 MR740cc - Manual (Page 9)

9
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope that you thoroughly enjoy your new Braun
appliance.
Please read the use instructions carefully and
completely before using the appliance.
Caution
•
The blades are very sharp! Handle blades
with utmost care in order to prevent
injuries.
• High risk of injury by switching on the appliance
unintentionally. As this is a rechargeable
appliance, it is ready for use anytime (when
charged).
• Do not expose the appliance to direct sunlight.
• When the blades are blocked remove motor part
from blender shaft, before removing the food/
blockage.
• Before cleaning, remove blender shaft from motor
part.
• The appliance is constructed to process normal
household quantities.
• This appliance is provided with a special cord set
with an integrated Safety Extra Low Voltage
power supply. Do not exchange or manipulate any
part of it. Otherwise there is risk of electric shock.
• Only use the appliance with the charging unit
supplied.
• The charging unit can remain permanently
connected to the mains.
• Protect the motor part, the charging unit and
special cord set against humidity. Motor part and
power supply of special cord set must no longer
be used after they have been immersed in water.
• This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are given supervision by
a person responsible for their safety. In general,
we recommend that you keep the appliance out of
reach of children. Children should be supervised
to ensure that they do not play with the appliance.
• Before use, make sure that charging unit and
special cord set are not damaged. Braun electric
appliances meet applicable safety standards.
• Repairs or the replacement of the mains cord
must only be done by authorised service
personnel.
• Faulty, unqualified repair work may cause
considerable hazards to the user.
Description
1 Pilot light
2 Switch release button
3 On
switch
4 Motor part
5 Push buttons for releasing the accessories
6 Blender shaft
7 Beaker
8 Charging unit (incl. cord storage)
9 Special cord set
10 Chopper attachment
(a)
Gear lid
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid
(e) Ice blade
(f) Ice crusher insert
Charging
The ideal temperature range for charging is between
15 °C and 35 °C.
Make sure that the charging unit (8) is located on a
level surface. Connect the charging unit to the mains
via the special cord set.
For charging, place the complete handblender in the
charging unit (8) – (motor part alone also possible).
The green pilot light confirms that the appliance is
properly inserted in the charging unit and that it is
being charged.
• Full charge: ca. 2 hours
• Fully charged: the pilot light flashes with longer
intervals
• Operation time is ca. 20 minutes (depending on
way of usage)
After every usage, place the appliance back onto
the charging unit for recharging. This will make sure
that it is always ready for use with optimum charging
conditions. You may as well store the appliance on
the charging unit. Even if not in use for a long period
of time, the lithium ion batteries implemented main-
tain their charging level to a large extent.
The batteries are protected against deep discharge.
A completely discharged appliance has to be
charged for at least ca. 15 minutes before it can be
used for an application (e.g. soup).
Pilot Light
Appliance in
charging unit
(connected to the
mains) Charging or operation
conditions
Green flashing Battery is charging
Green flashing
(in longer intervals) Battery is fully charged
99676583_MR740cc_China.indd 9 99676583_MR740cc_China.indd 9 09.08.10 14:44 09.08.10 14:44