Bissell 10N6-F - Manual (Page 7)

w w w. b i s s e l l . c o m
7
O
perations
Special on-board tools
Your vacuum is not only a powerful
carpet and rug cleaner, it’s also a
versatile above floor vacuum cleaner
when you select one of the special tools.
1. Raise the handle to the upright position.
2. Grasp the hose wand handle to separate
from hose wand base.
3. Attach tools by firmly pushing onto vacu-
um hose, hose wand or extension wand.
Be sure the hose and tool fit snuggly
together by twisting tightly.
Dusting Brush/Upholstery Tool:
Two types of cleaning tools in one attachment.
• Use brush side to dust furniture,
blinds, books, lamps, shelves and
baseboards.
• Use upholstery side for cushions,
draperies and fabrics.
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired
attachment for a longer reach.
Hose Wand: Use with desired attachment
for a longer reach or for cleaning hard to
reach places.
Pet TurboBrush™ Tool: Use rotating
brush action for small flat areas such
as cushions and beds.
NOTE: Press gently down and pull
towards you in a raking motion.
Too much pressure will cause the
brush to stop rotating.
CAUTION:
The rotating floor brush continues
to rotate while tools are in use.
To reduce the risk of injury from
moving parts, always move the
cleaner with the carrying handle.
Always place vacuum cleaner on
the floor with handle in upright
position when using tools. Never
place your fingers under the cleaner
when it is running. Never place
powerfoot on furniture or uneven
surfaces. Do not place vacuum
cleaner close enough to objects to
pull them into rotating brush.
Tip:
Before cleaning
under low furniture,
check area first for
objects that might
harm the unit or
block the vacuum
hose.
Dusting Brush/
Upholstery Tool
Extension Wand
Crevice Tool
Hose Wand
Base
Hose Wand
Pet TurboBrush™
Tool