Pioneer KRL-46V - Manual (Page 41)

Connecting a pC
note
The PC input terminals are DDC1/2B-compatible.
Refer to page 42 for a list of PC signals compatible with
the TV.
A Macintosh adaptor may be required for use for some
Macintosh computers.
When connecting to a PC, the input signal type is
automatically detected except 1,024 g 768 and 1,360 g
768 signals. Refer to Selection input resolution on page
40.
•
•
•
•
analogue Connection
note
Refer to page 35 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The ANALOGUE RGB (PC) terminal
(INPUT7) is not compatible with 480i/576i/1080p signals.
•
Connecting a pC
HDmi Connection
Displaying a pC image on the
screen
Selecting the picture size
You can select the picture size.
Press SCreen SiZe.
The SCreen SiZe menu displays.
Press SCreen SiZe or a/b to select a
desired item on the menu.
note
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
eXample
1
•
2
•
•
Full: An image fully fills the screen.
Cinema: For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
4:3: Keeps the original aspect ratio in a full screen display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.

ø 3.5 mm stereo minijack cable
input 4 or 5
HDMI-certified cable
pC
input 6
DVI/HDMI cable
RGB cable
DVI/RGB conversion cable
4:3 Full
item
pC
input 7 pC
pC
ø 3.5 mm stereo minijack cable
ø 3.5 mm stereo minijack cable
input 7
KRL46V_GB.indd 39 2008/07/09 14:09:06