Pioneer VSX-1014-S - Manual (Page 28)

Controls and displays 04
28
En
The following are accessed by pressing the RECEIVER
button first:
INPUT ATT
Attenuates (lowers) the level of an analog input
signal to prevent distortion.
FL DIMMER
Dims or brightens the display. Switching the dimmer
to lowest setting will also switch off the MCACC and
i.LINK indicators.
SR+
Switches the SR+ mode on/off (page 62).
5 Tuner/component control buttons/SYSTEM
SETUP
The following button controls (except SYSTEM SETUP )
can be accessed after you have selected the
corresponding
MULTI CONTROL button ( TUNER , DVD/
LD , TV/SAT , etc.)
D. ACCESS
After pressing, you can access a radio station directly
using the number buttons (page 47).
TOP MENU
Displays the disc ‘top’ menu of a DVD.
DTV MENU
Displays menus on a digital TV.
T. EDIT
Press to memorize and name a station for recall
(page 48).
GUIDE
Displays the guides on a digital TV.
SYSTEM SETUP
(Press RECEIVER first to access)
Use to access the System Setup menu (see page 38).
CLASS
Switches between the three banks (classes) of radio
station presets (page 48).
MENU
Displays the disc menu of DVD-Video discs. It also
displays TV and DTV menus.
BAND
Switches between the tuner AM and FM bands
(page 47).
RETURN
Press to confirm and exit the current menu screen
(also use to return to the previous menu with DVDs or
to select closed captioning with DTV).
6 (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your surround
sound system (see page 38). Also used to control DVD
menus/options and for deck 1 of a double cassette deck
player. Use the
TUNE +/– buttons to find radio
frequencies and use ST +/– to find preset stations
(page 48).
7 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
the
TV CONT button. Thus if you only have one TV to hook
up to this system assign it to the TV CONT MULTI
CONTROL button. If you have two TVs, assign the main
TV to the TV CONT button (see page 50 for more on this).
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
8 Component control buttons
The main buttons ( , , etc.) are used to control a
component after you have selected it using the MULTI
CONTROL buttons.
The controls above these buttons can be accessed after
you have selected the corresponding
MULTI CONTROL
button (for example DVD/LD , DVR/VCR or TV/SAT
(when connected to a DTV)).
DTV ON/OFF
Switches a digital TV on/off.
DTV INFO
Use to bring up information screens on a digital TV.
TUNER DISPLAY
Switches between named station presets and radio
frequencies (page 48).
MPX
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to
mono will improve the sound quality (page 47).
AUDIO
Changes the audio language or channel on DVD
discs.
CH RETURN
Returns to the last channel selected with DTV, SAT
and some TVs.
SUBTITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
VSX_2014TX.book.fm 28 ページ ２００４年８月１８日 水曜日 午後２時３３分