Pioneer DEH-1200MP - Manual (Page 7)

Scan play searches for a song within the selected re-
peat range.
1 Press a to turn scan play on.
If you turn scan play on during FLD, FSCN ap-
pears in the display.
2 When you find the desired track press b to turn
scan play off.
If the display has automatically returned to the
playback display, select
SCAN again by pressing F
(function).
After scanning of a disc (folder) is finished, nor-
mal playback of the tracks begins.
PAUSE (pause)
1 Press a or b to pause or resume.
COMP OFF (compression and BMX)
Using the COMP (compression) and BMX functions
let you adjust the sound playback quality of this unit.
1 Press a or b to select your favorite setting.
COMP OFF
—COMP 1—COMP 2—COMP OFF—
BMX 1 —BMX 2
FF/REV (fast forward/reverse)
You can switch the search method between fast for-
ward/reverse and searching every 10 tracks. Selecting
ROUGH enables you to search every 10 tracks.
1 Press d to select ROUGH.
FF/REV – Fast forward and reverse
ROUGH – Searching every 10 tracks
To select FF/REV, press c.
2 Press BAND/ESC to return to the playback dis-
play.
3 Press and hold c or d to search every 10 tracks
on a disc (folder).
If the rest of track number is less than 10, press
and hold c or d recalls the first (last) one.
Audio Adjustments
Audio Adjustments
% Press A (audio) to select the audio func-
tion.
After selecting, perform the following proce-
dures to set the audio function.
FAD (fader/balance adjustment)
You can change the fader/balance setting.
1 Press a or b to adjust front/rear speaker balance.
Adjustment range (front/rear): FAD F15 to FAD
R15
FAD 0 is the proper setting when only two speak-
ers are used.
2 Press c or d to adjust left/right speaker balance.
Adjustment range (left/right): BAL L15 to BAL
R15
BASS/MID/TREBLE (equalizer adjustment)
You can adjust the bass/mid/treble level.
! Adjusted equalizer curve settings are stored in
CUSTOM.
1 Press a or b to adjust the level.
Adjustment range: +6 to -6
LOUD (loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1 Press a or b to turn loudness on or off.
2 Press c or d to select the desired setting.
LOW (low) —HI (high)
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
! Settings are based on the FM volume level, which
remains unchanged.
Before adjusting source levels, compare the FM
volume level with the level of the source you wish
to adjust.
! The MW/LW volume level can also be adjusted
with source level adjustments.
1 Press a or b to adjust the source volume.
Adjustment range: SLA +4 to SLA –4
Note
You can also turn loudness on or off by pressing
and holding
EQ/LOUD.
Using the equalizer
% Press EQ/LOUD to select the equalizer.
DYNAMIC
—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL
! CUSTOM allows you to create a customized
setting.
! When FLAT is selected no adjustments are
made to the sound.
Operating this unit
En
7
English
Section
02