Pioneer VSX-818V-K - Manual (Page 29)

Controls and displays 04
29
En
English
Français
Deutsch
Nederlands
Italiano
Español
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the
TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the
TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the
TV CTRL button (see page 53 for more on
this).
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
TV VOL +/–
Use to adjust the volume on your TV.
Operating range of remote control
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver’s remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
DOW N
30
30
7 m
DOW N
DOW N
VSX_918_818_MY.book 29 ページ ２００７年１２月２７日 木曜日 午後４時２７分