Connection diagram for 3-way network mode, Without internal amp, Connecting the units – Pioneer DEH-P88RS User Manual
Page 12
Advertising
11
Connecting the Units
ENG/MASTER 96 INST
12
Power cable
(For details, refer to page 3 to 4.)
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Antenna jack
DSP switch
Switch the DSP switch as
illustration below.
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
This product
Blue/white (6*)
Speaker leads
Not used.
15 cm
30 cm
15 cm
Connection diagram for 3-way network mode without internal amp
Note:
•
If using this system, we recommend that this unit’s internal amp is turned off.
For more details, refer to operation manual.
1_CRD4079AN_Eng 05/11/29 14:44 Page 12
Advertising