Pioneer MJ-L77 - Manual (Page 18)

5 More Playback Features
18
You can set the MD player to repeat just a single track, or the whole disc.
1 Press MENU and select REPEAT MODE.
This menu option is available when the disc is stopped, paused or playing.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
2 Select a repeat mode.
Three options are available:
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
3 Start playback.
In one track repeat mode, any track you choose will repeat. If you jump to
another track (using track skip), then the new track will start repeating.
In all track repeat mode, whenever the end of the disc is reached, the player
will jump back to the first track and continue playback. You’re still free to
skip tracks and use manual search.
Note: The repeat mode you set stays active until you:
❖ select another repeat mode, or switch repeat mode off using the menu.
❖ eject the disc.
❖ switch to standby mode.
Playing Things Again
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU
MD
SET
4 ¢
After setting a repeat mode, the
display shows RPT for repeat all,
or R1 for repeat track
The repeat mode is indicated in
the display while the disc is
playing
Tip
You can use either of the repeat
modes together with the program
play mode.
Setting the repeat mode to
REPEAT ALL plays the tracks in the
playlist over and over. The display
indicates the mode:
In repeat track mode, just the
current track in the playlist
repeats. The display indicates the
mode:
$
REPEAT TRK ?
›
REPEAT OFF - REPEAT ALL ?