Pioneer SPH-DA02 - Manual (Page 13)

Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 V to 14.4 V DC)
Earthing system ....................... Negative type
Maximum current consumption
........................................... 12.0 A
Dimensions (W × H × D):
DIN
Chassis ............................... 188 mm × 118 mm ×
157 mm
Nose ..................................... 171 mm × 97 mm × 27 mm
D
Chassis ............................... 178 mm × 100 mm ×
165 mm
Nose ..................................... 171 mm × 97 mm × 19 mm
Weight .......................................... 1.45 kg
Display
Screen size/aspect ratio ....... 6.1 inch wide/16:9
(effective display area:
136.2 mm × 72 mm)
Pixels ............................................. 384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Colour system ........................... NTSC compatible
Tolerable temperature range:
Power on ............................
–10 °C to +60 °C
Power off ............................ –20 °C to +70 °C
Audio
Maximum power output ....... 50 W × 4
50 W × 2 ch/4
W + 70 W ×
1 ch/2
W (for subwoofer)
Continuous power output ... 15 W × 4 (FM, 1 %THD, 4 W
LOAD)
Load impedance ...................... 4
W (4 W to 8 W [2 W for 1 ch]
allowable)
Preout output level (max) .... 2.0 V
Preout impedance .................. 100
W
Equaliser (3-Band Parametric Equaliser):
Frequency
Low ............................. 60 Hz/80 Hz/100 Hz/200 Hz
Mid ............................. 500 Hz/1 kHz/1.5 kHz/2.5 kHz
High ........................... 10 kHz/12.5 kHz/15 kHz/
17.5 kHz
Gain ...................................... ±15 dB
Subwoofer:
Frequency .......................... 80 Hz/120 Hz/160 Hz
Gain ...................................... ±12 dB
USB
USB standard spec. ............... USB 1.1 Full Speed
Max current supply ................. 1 A
USB class .................................... for iPhone only
Bluetooth
Version .......................................... Bluetooth 2.1+EDR
Output power ............................ +0 dBm Max.
FM tuner
Frequency range ...................... 87.5 MHz to 108.0 MHz
Usable sensitivity ..................... 17 dBf (0.8 µV/75
W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
Distortion ..................................... 1.3 % (at 65 dBf, 1 kHz,
stereo)
0.3 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 100 Hz to 10 000 Hz (+2 dB/
–13 dB)
Stereo separation .................... 31 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ...................... 532 kHz to 1 602 kHz (9 kHz)
Usable sensitivity ..................... 32 dBµV (S/N: 20 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 34 dBµV (S/N: 20 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
GPS
GPS receiver:
System ................................ L1, C/Acode GPS
Reception system .......... 22 tracking/66 acquisition-
channel system
Reception frequency .... 1 575.42 MHz
Tracking sensitivity ........
–165 dBm (typ)
Frequency .......................... Max. 10 a second (10 Hz)
GPS aerial:
Aerial ................................... Micro strip flat aerial/right-
handed helical polarisation
Aerial cable ...................... 3.0 m
Dimensions (W × H × D)
........................................... 50.6 mm × 15.5 mm ×
50.6 mm
Weight ................................ 85 g
SD
microSD card, microSDHC card
Compatible physical format
..................................................... Version 2.00
Max memory capacity ........... 16 GB
File system .................................. FAT16, FAT32
Decoding format ...................... Software Update only
Note
Specifications and design are subject to possible
modifications without notice due to im-
provements.
Engb
13
English
Appendix
Appendix