Pioneer DEH-X5500BT - Manual (Page 4)

DEH-4500BT
6 5 9 c a
2 1
d 8 7 b
3
e
Indicator State
1
Main infor-
mation
section
! Tuner: band and frequency
! RDS: program service name,
PTY information and other lit-
eral information
! CD player, USB storage device
and iPod: elapsed playback
time and text information
2
Appears when a lower tier of
folder or menu exists.
3
(auto an-
swer)
Shows when the automatic an-
swering function is on.
4
Shows when 12H is selected
under 12H/24H and CLOCK is se-
lected under INFO DISPLAY.
5 (list)
The list function is being oper-
ated.
6
Sub infor-
mation
section
Sub information is displayed.
7 LOC Local seek tuning is on.
8
TP (traffic
program
identifica-
tion)
A TP station is tuned in.
9
TA (traffic
announce-
ments)
TA function is on.
a (sound re-
triever)
The sound retriever function is
on.
b
(ran-
dom/shuf-
fle)
Random play is on.
The iPod source is selected and
the shuffle or shuffle all function
is on.
c (repeat) Track or folder repeat is on.
Indicator State
d
(iPod
control)
This unit
’s iPod function is oper-
ated from your iPod.
e (Bluetooth
indicator)
Connected to a Bluetooth device.
The line is on hold.
Set up menu
When you turn the ignition switch to ON after
installation, set up menu appears on the dis-
play.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO. Press to select.
If you select
NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
LANGUAGE (multi-language)
This unit can display the text information from a com-
pressed audio file even for information embedded in
English or Russian.
! If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
! Some characters may not be displayed properly.
1 Turn M.C. to select the desired setting.
ENG (English) —РУС (Russian)
2 Press M.C. to confirm the selection.
CLOCK SET (setting the clock)
En
4
Section
02 Operating this unit