Pioneer BDP-430 - Manual (Page 18)

Partial Repeat Playback (Repeat
Playback of a Specified Part)
DVD VIDEO DVD-R DVD-RW
AUDIO CD
Press 1 REPEAT during playback.
Press 2  to select “Scene Selection”, then
press ENTER.
“Set Start Point” displays. •
Set Start Point
Playback Title
Playback Chapter
Scene Selection
Press 3 ENTER at the scene where you want to
set the start point.
“Set End Point” displays. •
Press
4 ENTER at the scene where you want to
set the end point.
The end point cannot be set when •  REV,
 FWD,  or  is pressed.
To cancel Repeat Playback, press
• REPEAT OFF or
REPEAT .
NOTE
Press • , the Repeat Playback is cancelled and
the next chapter (track) being play back (not including
music CDs).
Press
•  once, the Repeat Playback is cancelled and the
player returns to the start of current chapter (track).
If you press
•  again (within about 5 seconds) the player
will skip to the beginning of the previous chapter (track).
For Partial Repeat Playback, set the start and end points
•
within the same title.
Repeat Playback may be forbidden depending on the disc.
•
During BD video, the same scene cannot be played •
repeatedly.
Partial Repeat Playback may not work in multi-angle
•
scenes.
If you press
• DISPLAY , you can confirm the Repeat
Playback status (except for Audio CDs).
Repeat Playback of a Title or
Chapter (Repeat Playback)
Play back the title or chapter you want to repeat. 1
Press 2 REPEAT .
Press 3  to select the type of Repeat
Playback.
Playback Title: Repeats the title currently being played •
back.
Playback Chapter: Repeats the chapter currently
•
being played back.
Scene Selection: Repeats the specified scene of title
•
or chapter.
Playback Title
Playback Chapter
Scene Selection
Press • RETURN to cancel without setting the type
of Repeat Playback.
For Audio CD, you can select “Playing Disc”, “Playing
•
Track” and “Specify The Part” as Repeat Playback
options.
Press 4 ENTER .
Example : Repeat playback of a title
BD-VIDEO
00 :20 :30
1
1/3
5 .1ch
5 5 /2
2 English
1
On Title Repeat
C
On Title Repeat
Press 5 REPEAT OFF or REPEAT to return to
normal playback.
Switching the Audio Mode
Press AUDIO.
The displayed content differs from disc to disc.
DVD VIDEO BD VIDEO
The audio track currently being played back will be
displayed.
When multiple audio tracks are recorded on the disc,
the audio track switches each time AUDIO is pressed.
DVD-R DVD-RW BD-R BD-RE
The mode switches as shown below each time
AUDIO
is pressed.
In the event bilingual (multiplex) broadcasts are
recorded:
The display will show • “MAIN”, “SUB” or “MAIN SUB”
When a recorded broadcast with stereo or monaural
audio is played back:
“Stereo” is displayed. (Audio cannot be switched.) •
NOTE
When you play a program recorded in stereo or monaural, •
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set the
digital audio output setting to “PCM” (page 20) or listen via
the analog output jacks if you want to change the audio
channel.
Settings for audio can be changed also in Function Control
•
Screen (Page 19).
Some discs allow changing of the audio channel via a
•
menu. For details, see the manual for the disc.
The display for audio automatically disappears after 5
•
seconds.
Switching Subtitles
If subtitles are provided in multiple languages, you can
switch between them.
Press SUBTITLE during playback.
The display indicates the subtitle number currently being •
played back, and the subtitles appear.
Each time
• SUBTITLE is pressed, the subtitles change.
You can also select “Off”. •
NOTE
Settings for subtitles can be changed also in Function •
Control Screen (Page 19).
Some discs allow changing of the subtitles channel via a
•
menu. For details, see the manual for the disc.
The display for subtitles automatically disappears after 5
•
seconds.
Switching the Angle
If multiple angles are recorded, you can switch
between them.
Press 1 ANGLE during playback.
The display indicates the angle number currently being •
played back. Each time you press ANGLE, the angle
switches.
1
To return to the previous angle, press ANGLE to cycle
through the angles until you return to the original angle.
Displaying the Angle Mark
You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. (The Angle Mark is displayed
for BD/DVD video.) The settings can be changed in
“Settings” – “Playback Setting” – “Angle Mark Display”
(Page 21).
NOTE
Settings for angles can be changed also in Function •
Control Screen (Page 19).
Some discs allow changing of the angles channel via a
•
menu. For details, see the manual for the disc.
The display for angles automatically disappears after 5
•
seconds.
Playback Functions
18