Pioneer SC-LX82 - Manual (Page 137)

Additional information 13
137
En
The audio files stored on
components on the network,
such as a PC, cannot be
played back. Windows Media Player 11 is not currently
installed on your PC. Install Windows Media Player 11 on your PC
(page 69).
Audio files were recorded in formats other than
MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, and
WMA. Play back audio files recorded in MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC, or WMA. Note
that some audio files recorded in these formats
may not be played back on this receiver.
Audio files recorded in MPEG-4 AAC or FLAC are
being played back on Windows Media Player 11 or
Windows Media Connect. Audio files recorded in MPEG-4 AAC or FLAC
cannot be played back on Windows Media Player
11 or Windows Media Connect. Try using another
server. Refer to the operation manual supplied
with your server.
The component connected to the network is not
properly operated. Check whether the component is affected by
special circumstances or is in the sleep mode.
Try rebooting the component if necessary.
The component connected to the network does
not permit file sharing. Try changing the settings for the component
connected to the network.
The folder stored on the component connected to
the network has been deleted or damaged. Check the folder stored on the component
connected to the network.
Cannot access the
component connected to the
network. The component connected to the network is not
properly set. If the client is automatically authorized, you need
to enter the corresponding information again.
Check whether the connection status is set to “Do
not authorize”.
There are no playable audio files on the
component connected to the network. Check the audio files stored on the component
connected to the network.
Audio playback is undesirably
stopped or disturbed. The audio file currently being played back was not
recorded in a format playable on this receiver. Check whether the audio file was recorded in a
format supported by this receiver.
Check whether the folder has been damaged or
corrupted.
Note that there are cases where even the audio
files listed as playable on this receiver cannot be
played back or displayed (page 75).
The LAN cable is currently disconnected. Connect the LAN cable properly (page 69).
There is heavy traffic on the network with the
Internet being accessed on the same network. Use 100BASE-TX to access the components on
the network.
Cannot access Windows
Media Player 11. You are currently logged onto the domain through
your PC with Windows XP installed. Instead of logging onto the domain, log onto the
local machine (page 71).
Cannot listen to Internet radio
stations. The firewall settings for components on the
network are currently in operation. Check the firewall settings for components on the
network.
You are currently disconnected from the Internet. Check the connection settings for components on
the network, and consult with your network
service provider if necessary (page 76).
The broadcasts from an Internet radio station are
stopped or interrupted. There are cases where you cannot listen to some
Internet radio stations even when they are listed in
the list of Internet radio stations on this receiver
(page 72 and 138).
The Home Media Gallery
cannot be operated with the
buttons on the remote control. The remote control is not currently set to the
Home Media Gallery mode. Press HOME MEDIA GALLERY to set the remote
control to the Home Media Gallery mode
(page 71).
Symptoms Causes Remedies
SC-LX82_LX72.book Page 137 Thursday, April 23, 2009 7:05 PM