Recording the copy list, Hdd to dvd copy list commands, Copying and back-up 07 – Pioneer DVR-520H-S User Manual
Page 65
 
Copying and back-up
07
65
En
English
Recording the Copy List
After putting together your Copy List, you’re ready to 
record it.
1
Select ‘Conf List’ to display the Copy List settings
screen.
2
Use the
/
(cursor left/right) buttons to select
the Recording Mode.
•
High-Speed Copy
– The Copy List is copied at the
same recording quality as the original. (See page 61 
for more information on high-speed copying.)
•
FINE
,
SP
,
LP
,
EP
,
MN
– The Copy List is copied at the
specified recording quality in real-time. (Note that if 
you copy at a higher quality setting than the original, 
the copy will not be better quality than the original.)
If you select
MN
above, you can also change the level
setting (
MN1
–
MN32
) from the Recording Quality box
that appears.
•
Optimized
– The recording quality automatically
adjusted so that the Copy List fits on to the space 
available on the disc. Copying is carried out in real-
time.
When you change the recording mode setting, you can 
see how much disc space it will require. If this is more 
than is available, it shows up in red and you won’t be able 
to start copying. In this case, either change the recording 
quality, or press 
RETURN
to go back to the Copy List
screen and erase one or more titles from the Copy List.
3
Select ‘Start’ to begin copying.
Note
• When the copy mode is set to something other than
High-Speed Copy for copying to a Video mode DVD, 
the chapter markers of the original are not copied. 
Chapter markers are put into the copy at regular 
intervals, according to the Auto Chapter setting (see 
also 
Auto Chapter (Video)
on page 108).
HDD to DVD Copy List commands
Add
Use this command to add titles to the Copy List.
1
Select ‘Add’ from the Copy List menu options.
2
Use the
/
(cursor left/right) buttons to select
a title from the HDD to add to the Copy List, then 
press ENTER.
The thumbnail appears in the Copy List section in the 
lower half of the screen. If there are already titles in the 
Copy List, the title is added at the end.
3
Repeat step 2 to add more titles to the Copy List,
or press RETURN to go back to the Copy List menu 
options.
Note
• When Frame Accurate is set to
Off
(see
Frame
Accurate
on page 108), the following limitations on
adding titles to the Copy List apply:
– When adding titles that contain copy-once 
protected material, the copy-once parts will not be 
added to the Copy List.
– When adding titles that contain material of more 
than one aspect ratio (screen size), each part with a 
different aspect ratio will be added as a separate title.
– Widescreen material recorded in 
LP
,
EP
or
MN1
–
18
will not be added to the Copy List.
– Chapter markers on the copy may be up to 0.5 
seconds off compared to the original.
• Only titles which were recorded in the same TV
system as the recorder is currently set to can be 
added to the Copy List.
HDD
HDD to DVD Copy
Add
Erase
Ttl Name
Divide
Combine
HDD DVD-RW VIDEO
Required 0h08m
Recording Mode
Copy List Total
Current DVD Remain
1175MB
2830MB
/ 4700MB
Conf List
High Speed
Start
Conf List
HDD
Add
Erase
Ttl Name
Divide
Combine
DVD
DVD
HDD
HDD
1
1/3
1/2
Copy List
All
Total 1h30m
2
3
4
1
2
3
4
HDD to DVD Copy
16:00 Sun 11/8
Recording Time
Pr 5 LP
 0h32m55s
DVR-04_HDD_EU.book 65 ページ 2004年4月11日 日曜日 午後1時45分