Pioneer AXM-P90RS - Manual (Page 11)

Configure the general settings
Switching to general setting
screen
% Press FUNC 3 on the initial setting
screen.
General setting screen is displayed and gener-
al settings are now available.
Switching the auxiliary setting
This unit can control up to five auxiliary de-
vices. Each auxiliary device
’s setting must be
activated independently in order to connect
and use with this unit. Before using auxiliary
devices, be sure to configure this setting.
1 Press FUNC 1 on the general setting
screen.
AUX setting screen is displayed and AUX set-
tings are now available.
2 Press the button (FUNC 1 to FUNC 5)
that has auxiliary device assigned.
Pressing the button (
FUNC 1 to FUNC 5) re-
peatedly will turn the auxiliary device on or off
independently.
Setting the battery voltage
indication
Shows the battery voltage.
! Voltage indicator may differ from the actual
voltage level.
% Press FUNC 2 on the general setting
screen.
Pressing
FUNC 2 repeatedly will turn the bat-
tery voltage indication on or off.
Setting the confirmation sound
The short beep that sounds when operating
this unit can be turned on or off.
! This function is effective only when the re-
mote control sensor is installed.
% Press FUNC 3 on the general setting
screen.
Pressing
FUNC 3 repeatedly will turn the con-
firmation beep sound on or off.
Returning to the initial setting
screen
% Press RETURN.
Pressing
RETURN takes you back to the initial
setting display.
Setting the menu lock
Menu lock avoids the readjusting of audio set-
tings. If menu lock is turned on, all audio ad-
justment are turned off.
Setting the menu lock
% Press FUNC 4 on the initial setting
screen.
Pressing
FUNC 4 repeatedly will turn the
menu lock on or off.
Setting the audio processor
In order to use this system correctly, this unit
needs to be adapted to the connected audio
processor. Before using this system, set this
function correctly.
Initial Settings
En
11
Section
04
Initial
Settings