Pioneer DEH-P7000UB - Manual (Page 49)

! Disconect phone (disconnect phone)
! Set phone (registering phone)
! Clear memory (clear memory)
! PH.B.Name view (phone book name view)
! Number dial (call by entering number)
If connected but not registered yet
The following functions cannot be operated.
! Search & Connect (search and connect)
! Connection open (connection open)
! Connect phone (connect phone)
! PH.B.Name view (phone book name view)
! Clear memory (clear memory)
If already connected and registered
The following functions cannot be operated.
! Search & Connect (search and connect)
! Connection open (connection open)
! Connect phone (connect phone)
! Set phone (registering phone)
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the playback display, press BAND.
! Device info is the same as that of the Blue-
tooth audio. (Refer to Displaying BD (Bluetooth
Device) address on page 46.)
! PH.B.Name view (phone book name view)
cannot be selected for cellular phone regis-
tered guest phone.
! If cellular phone is connected to this unit via
Bluetooth wireless technology with HSP
(Head Set Profile),
PH.B.Name view,
Clear memory, Number dial and
Refuse calls cannot be selected.
! If you do not operate functions other than
Search & Connect, Connection open,
Connect phone, PH.B.Transfer,
Disconect phone, Number dial,
Clear memory and PH.B.Name view within
about 30 seconds, the display automatically
returns to the ordinary display.
Connecting a cellular phone
Searching for available cellular phones
1 Display the function menu.
Refer to Function and operation on the previous
page.
2 Use MULTI-CONTROL to select
Search & Connect in the function menu.
3 Press MULTI-CONTROL to search for
available cellular phones.
While searching,
SEARCHING flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name not found (if names cannot be ob-
tained) is displayed.
# If this unit fails to find any available cellular
phones,
Not found is displayed.
4 Push MULTI-CONTROL up or down to
select a device name you want to connect.
5 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
Connecting flashes. To
complete the connection, check the device
name (
Pioneer BT Unit) and enter the link
code on your cellular phone. If the connection
is established,
Connected is displayed.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 39.
Using a cellular phone to initiate a
connection
1 Display the function menu.
Refer to Function and operation on the previous
page.
2 Use MULTI-CONTROL to select
Connection open in the function menu.
Available accessories
En
49
Section
06
A
vailable
accessories