Pioneer DEH-P3100UB - Manual (Page 48)

# To return to the ordinary display, press
BAND/ESC or
/ LIST.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
# If no title is entered for a disc, NO DISC TITLE
is displayed.
# NO DISC is displayed when there is no disc in
the magazine.
TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner
’s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner
’s operation manual.
% Selecting a band
Press
BAND/ESC.
% Selecting a channel (step by step)
Push
MULTI-CONTROL left or right.
% Seeking tuning
Push and hold
MULTI-CONTROL left or right,
and then release.
Notes
! Band can be selected from TV-1 or TV-2.
! You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
! While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL.
Storing and recalling broadcast
stations
You can easily store up to 12 broadcast sta-
tions for later recall.
! 12 stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
# You can also store the station in memory by
pushing and holding
MULTI-CONTROL right.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Note
You can also recall stations assigned to preset
tuning numbers by pushing
MULTI-CONTROL up
or down during the channel display.
Available accessories
En
48
Section
06