Pioneer DEH-4600BT - Manual (Page 20)

1 Press M.C. to display the setting mode.
2 Press M.C. to select the segment of the clock dis-
play you wish to set.
Hour
—Minute
3 Turn M.C. to adjust the clock.
12H/24H (time notation)
1 Press M.C. to select the desired setting.
12H (12-hour clock) —24H (24-hour clock)
INFO DISPLAY (sub information)
The type of text information displayed in the sub infor-
mation section can be toggled.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
SPEANA —LEVEL METER—SOURCE—CLOCK—
OFF
! The signal bar indicator displays for SPEANA or
LEVEL METER when the source is set to RADIO.
AUTO PI (auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1 Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press M.C. to turn AUX on or off.
DIMMER (dimmer)
1 Press M.C. to turn the dimmer on or off.
! You can also change the dimmer setting by press-
ing and holding / DIMMER.
BRIGHTNESS (brightness adjustment)
You can use this setting to adjust the display bright-
ness.
The range of settings available for
BRIGHTNESS will
vary depending on whether DIMMER is on or off. For
details, refer to DIMMER (dimmer) on page 20.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
DIMMER on: 1 to 4
DIMMER off: 1 to 5
BT AUDIO (Bluetooth audio activation)
You need to activate the BT AUDIO source in order to
use a Bluetooth audio player.
1 Press M.C. to turn the BT AUDIO source on or off.
PW SAVE (power saving)
Switching this function on enables you to reduce the
consumption of battery power.
! Turning on the source is the only operation al-
lowed when this function is on.
1 Press M.C. to turn the power save on or off.
BT MEM CLEAR (clearing the Bluetooth device data
stored on this unit)
Bluetooth device data stored on this unit can be
cleared. To protect your personal information, clear
the device memory before you pass the unit on to
someone else. The following information will be de-
leted.
Device list/PIN code/call history/phone book/preset
phone numbers
1 Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to clear the Bluetooth device
data stored on this unit, turn
M.C. to display CAN-
CEL and press it again to select.
2 Press M.C. to clear the memory.
CLEARED is displayed and the Bluetooth device
data is cleared.
! While this function is in use, do not turn off the
engine.
BT VERSION (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press M.C. to display the information.
APP CONN. SET (APP connect mode setting)
Select an appropriate option for your connected de-
vice.
1 Press M.C. to select the desired setting.
WIRED (for iPhone) —BLUETOOTH (for smart-
phone)
! This setting is not available when the source is set
to APP.
Selecting the illumination
color
Only for DEH-X5600BT
Illumination function menu
1 Press M.C. to display the main menu.
En
20
Section
02 Using this unit