Pairing from your bluetooth, Devices, 05 changes on the upgraded programme – Pioneer AVIC-F50BT User Manual

Page 23: Pairing from your bluetooth devices

Advertising
background image

Pairing from your Bluetooth
devices

You can register the Bluetooth device by set-
ting the navigation system to standby mode
and requesting connection from the Bluetooth
device.

1

Activate the Bluetooth wireless tech-

nology on your devices.
For some Bluetooth devices, no specific action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.

2

Touch [Phone].

The

“Phone” screen appears.

3

Touch [Bluetooth Settings].

The

“Bluetooth Settings” screen appears.

4

Touch [Registration].

The

“Device list” screen appears.

5

Touch [Register from device].

The navigation system waits for a Bluetooth
wireless technology connection.

6

Register the navigation system on your

Bluetooth device.
If your device asks you to enter a password,
enter the password of the navigation system.
When the device is successfully registered,
the connection settings are made from the de-
vice.

p If registration fails, repeat the procedure

from the beginning.

7

Touch [OK].

The registration is complete, and the device is
connected as a hands-free phone.
You can perform the following setting depend-
ing on the Bluetooth device registered.

! Transferring the phone book

You can transfer the phone book to the navi-
gation system if the registered Bluetooth
device features PBAP (Phone Book Access
Profile).

If you touch [

Yes], you can transfer the

whole phone book to the navigation system,
and then the message that transfer is fin-
ished appears.

! Selecting whether to use the Bluetooth

audio
You can select whether to use the
Bluetooth audio function if the registered
Bluetooth device features Bluetooth audio.

The message

“Is this Android?” appears.

8

Touch [No].

The message

“Is this device equipped with a

Digital AV Connector?

” appears.

9

Touch [Yes].

The message

“Do you want to set this de-

vice for the AppRadio Mode?

” appears.

10 Touch [Yes] if you use the AppRadio
Mode with a device you registered.

! Yes:

Allows you to proceed to the next step.

! No:

The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.

11 Touch [OK].

Engb

23

English

Chapter

05

Changes on the upgraded programme

Advertising
This manual is related to the following products: