Bushnell ImageView 11-0833 - Manual (Page 9)

9
Press the 7. View button if you wish to check the photo after you take it, then press it again to return to a
live preview.
See the section “Review Mode” section for more detail about reviewing and deleting previously taken
photos.
Warning: Use care during handling to avoid touching the camera lens (located front center between the
binocular lenses) to prevent degrading the image quality.
Clean the camera lens only with dry lens tissue or microfiber cloth. DO NOT use liquids of any type.
Selecting and Using the Video Mode
Follow steps 1-4 on the previous page, “Taking Still Photos” 1.
To change from still photo to video mode, press the Right arrow key 3 times, until the movie camera icon 2.
is displayed at the top right area of the LCD. You are now in Video Mode. Press SNAP to start recording a
new video clip, and press it again to stop recording and store the video in memory. The recording time
is limited only by the amount of internal or card memory currently available. You may record a single
long video until you run out of memory, or multiple shorter videos by stopping and starting recording
whenever you wish by pressing SNAP. The counter on the right side of the display shows the elapsed
time in seconds since the recording was started.
Press the 3. View button if you wish to check a video after you shoot it. Press the SNAP button to begin
playback, press it again to stop playback. Press the Left arrow key to review your previous video or
still photo files. Pressing the Display button will let you see a “thumbnail” review of multiple files-use
the arrow keys to highlight the file you wish to review, then press Display again to select and view it.
When you are ready to return to the live preview display to shoot more videos (or stills), press the View
button.
See the section “Review Mode” for more detail about reviewing and deleting previously taken videos.