Pioneer DEH-P8100BT - Manual (Page 13)

Basic Operations
RDS
6 6 6
1 1 1 1 2 2 2 2 3 3 3 3
7 7 7 4 4 4 5 5 5 8 8 8
1 Band indicator
2 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 Preset number indicator
4 TP (
) indicator
Appears when a TP station is tuned in.
5 News ( ) indicator
Appears when the set news program is re-
ceived.
6 Program service name
7 PTY label indicator
8 TEXT indicator
Shows when the radio text is received.
Non-RDS or MW/LW
5 5 5
1 1 1 1 2 2 2 2 4 4 4 4 3 3 3
1 Band indicator
2 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 LOC indicator
Appears when local seek tuning is on.
4 Preset number indicator
5 Frequency indicator
% Select a band
Press
BAND/ESC/CANCEL.
# Band can be selected from among FM1, FM2,
FM3 or MW/LW.
% Manual tuning (step by step)
Push
MULTI-CONTROL left or right.
% Seek tuning
Push and hold
MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL.
Notes
! This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 15).
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS
station.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
# All stations stored for FM bands can be re-
called from each independent FM band.
Tuner
En
13
Section
04
Tuner