Pioneer AVIC-X3-II - Manual (Page 22)

! When installing the hide-away unit in the
boot, use the extension cable (e.g. CD-
SC300E)(sold separately).
! Do not install the display unit in a position
where the opening of the LCD panel is ob-
structed by any obstacles, such as the
gearstick. This may cause interference with
the gearstick, or a malfunction of the me-
chanism of the display unit.
! Make sure you leave enough gap between
the dashboard and the LCD panel of the
display unit so the LCD panel can be
opened and closed without contacting with
the dashboard.
Dashboard
Leave gap
LCD panel
Parts supplied
Parts marked (*) are pre-installed.
The hide-away unit The display unit
Holder* Side bracket
(2 pcs.)
Washer faced screw
(4 mm × 8 mm)
(4 pcs.)
Self-tapping screw
(6 mm × 16 mm)
(4 pcs.)
Frame* Side bracket (small)*
(2 pcs.)
Side bracket (large)
(2 pcs.)
Screw for fixing the
side bracket*
(5 mm × 6 mm)
(2 pcs.)
Conceal tape Double-ended screw
Installation
Engb
22
Section
04