Pioneer DEH-8400BT - Manual (Page 24)

2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to switch to Display and
press to select.
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
! CUSTOM (customized illumination color)
Note
For details about colors on the list, refer to Select-
ing the key color from the illumination color list on
the previous page.
Selecting key and display color from
the illumination color list
You can select the desired colors for the keys
and display of this unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key & Display and
press to select.
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
Notes
! You cannot select CUSTOM in this function.
! Once you select a color in this function, colors
on the keys and display of this unit automati-
cally switch to the color you selected.
! For details about colors on the list, refer to Se-
lecting the key color from the illumination color
list on the previous page.
Customizing the illumination color
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key or Display.
Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
5 Press M.C. to select the primary color.
R (red)
—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three
of
R (red), G (green), and B (blue) at the same
time.
# You can also perform the same operation on
other colors.
Notes
! You cannot create a custom illumination color
when SCAN or a set of colors (WARM,
AMBIENT, or CALM) is selected.
! You can create custom illumination colors for
both Key and Display.
En
24
Section
02 Operating this unit