Pioneer DDJ-S1 - Manual (Page 34)

34 En
File corruption messages
An error code is displayed on the screen if this unit cannot operate properly. Check the error on the table below and take the appropriate action.
Error code Description of error Cause and action
Corrupt file : This MP3 contains
invalid frames This file contains frames not conforming to formal
MP3 standards. Normal playback is not guaranteed.
We recommend that you remake the file.
Corrupt file : This file contains
corrupt frames that may result
in audible glitches
This file contains consecutive corrupt frames.
We recommend that you remake the file.
Corrupt frames are played with no sound, so the sound will seem to be inter-
rupted.
Corrupt file : This file has been
split. You should check the
beginning for audio glitches
The sound that should be at the first MPEG audio
frame in the file has been lost.
This could be due to irregular MP3 editing. Because corrupt frames are played
with no sound and because many tracks start with no sound, it may be difficult
to notice this, but we recommend listening carefully to check.
Corrupt file : This MP3 contains
frames with corrupt data
Corrupt file : This MP3 file lost
synchronization between the
frame index and the frame
An old MP3 overview edited with a different editing
program is loaded. As with other corrupt files, the corrupt section is played with no sound.
We recommend that you remake the file.
Corrupt file : This MP3 is
completely invalid and is not
playable This file contains invalid data and cannot be played.
The cause could be a bad sector, a corrupt system file,
use of an erroneous file format or extension, etc.
Remake the overview.
Corrupt file : This file contains
invalid audio data Large quantities of invalid data were found when
searching the audio data.
We recommend that you remake the file.
Corrupt file : This MP3 contains
no valid frames The file cannot be played because no audio data was
found.
Check whether or not this is a legitimate music file.
Unsupported file : This MP3
contains multiple layers Multiple layers of MPEG frames were found when
scanning the file. MP3 files containing multiple layers of frames cannot be played. Depending on
the frames, they may be played with no sound.
Unsupported file : This file is
more than 2GB in size
The file exceeds the limit size of 2 GB.
Files exceeding 2 GB in size are not supported.
We recommend that you remake the file.
Unsupported file : This file
had data blocks greater than
2GB size
There are data blocks exceeding the limit size of 2 GB
in the file. Files exceeding 2 GB in size are not supported.
We recommend that you remake the file.
Corrupt file : This WAV contains
no valid chunks There is no recognizable WAV data in the file. This
may not be a WAV file.
Use a music file format that can be played.
Unsupport file : This file’s data
is not in PCM format The WAV data is not in PCM format so the file cannot
be played.
Only WAV files in PCM format can be played.
Unsupported file : This file has
a sampling rate greater than
48kHz
The file cannot be played because the sampling rate
exceeds 48 kHz.
Resample the file at 48 kHz and save it.
Unsupported file : This file uses
more than 24bits per sample The file cannot be played because the bitrate exceeds
24 bits. We recommend that you remake the file.
A maximum of 24 bits per audio sample data is supported.
Corrupt file : This WAV is
incomplete
The amount of data is under the anticipated file size.
Either the data is corrupt or it has not been properly
edited, so ITCH cannot properly determine the amount
of data in the file.
We recommend that you remake the file.
Corrupt file : This file contains
corrupt blocks
This file contains block data whose size is 0 (zero).
We recommend that you remake the file.
Continued use could cause ITCH to become unstable or freeze.
Corrupt file : This song contains
no audio data No audio data can be found in the file, so it cannot
be played.
Check whether the file contains audio data.
Corrupt file : This song contains
invalid samples This file contains audio samples whose size is too
small. If the size is too small, it may be identified as 0 (zero). This does not particularly
affect playback, but the sound may be interrupted.