Pioneer PDA-V100HD - Manual (Page 12)

Preparation 06
12
En
Chapter 6
Preparation
Installing the unit
Caution
• Do not place a VCR or any other device on the
top of the unit.
• When installing, allow enough space on the
sides and above the unit.
• Do not block the side ventilation opening or the
rear exhaust opening of the unit.
Caution
• Placing the unit alone in the vertical position can
result in product damage and malfunction.
Preparing the remote control
unit
Inserting batteries
1 Open the battery cover.
2 Load the supplied two AA size batteries while
inserting their respective negative polarity (–) ends
first.
Place batteries with their terminals corresponding to
the (+) and (–) indicators in the battery compartment.
3 Close the battery cover.
PDA-V100HD
1 2 3 4 5 6 STANDBY
STANDBY/ON
INPUT INPUT
Over 5 cm Over 5 cm
Over 5 cm
Over 10 cm
Exhaust
opening
Ventilation
opening
PDA-V100HD
12
34
5
6
ST
ANDBY ST
ANDBY/ON