Pioneer RS-A99 - Manual (Page 9)

About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2
W
to 8
W, or 4 W to 8 W for two-channel and other
bridge connections.
Subwoofer
Speaker channel Power
Four-channel output
Nominal input:
Min. 60 W
Two-channel output
Nominal input:
Min. 180 W
Three-channel
Speaker output A Nominal input:
Min. 60 W
Three-channel
Speaker output B Nominal input:
Min. 180 W
Other than subwoofer
Speaker channel Power
Four-channel output
Max. input:
Min. 100 W
Two-channel output
Max. input:
Min. 300 W
Three-channel
Speaker output A Max. input:
Min. 100 W
Three-channel
Speaker output B Max. input:
Min. 300 W
Connecting the speakers
The speaker output mode can be four-channel,
three-channel (stereo and mono) or two-chan-
nel (stereo or mono). Connect the speaker
leads based on the mode and the figures
shown below.
Four-channel output
1 2
1 2
3
4
1 Left
2 Right
3 Speaker out A
4 Speaker out B
Three-channel output
4
1 2
3
1 Left
2 Right
3 Speaker out A
4 Speaker out B (Mono)
En
9
Section
03
Connecting
the
units
Connecting the units