Using the graphic equalizer 41, Recalling equalizer curves 41, Adjusting equalizer curves 41 – Pioneer FH-P4100R User Manual

Page 41: Adjusting 9-band graphic, Equalizer 41, Using the graphic equalizer, Digital signal processor 10, Recalling equalizer curves, Adjusting equalizer curves, Adjusting 9-band graphic equalizer

Advertising
background image

Black plate (41,1)

41

CRD3576-A

Using the graphic equalizer

The graphic equalizer lets you adjust the

equalization to match car interior acoustic

characteristics as desired.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Button

Display

Equalizer curve

1

S-BASS

Super bass

2

PWFL

Powerful

3NTRL

Natural

4

VOCAL

Vocal

5

CUSTOM

Custom

6

FLAT

Flat

! CUSTOM is an adjusted equalizer curve that

you create. Adjustments can be made with an
9-band graphic equalizer.

! When FLAT is selected no supplement or

correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a
set equalizer curve.

1 Press DSP to select the graphic

equalizer.

Press DSP until PWFL appears in the display.

# If the graphic equalizer has been previously

set to an equalizer curve other than PWFL then
the title of that previously selected equalizer curve
will be displayed, such as S-BASS, NTRL, VOCAL,
CUSTOM, or FLAT.

2 Select an equalizer curve by

pressing 16.

Select the desired equalizer curve by pressing

one of the numbered buttons, from 16, which

correspond to the different equalizer curves as

listed above.

# You can also sequentially select an equalizer

curve by pressing c or d.

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of FLAT, can be adjusted to a fine

degree (nuance control).

1 Recall an equalizer curve.

See Recalling equalizer curves on this page.

2 Press a or b to adjust the equalizer

curve.

Each press of a or b increases or decreases

the equalizer curve respectively.

+6  5 (or 6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are dif-

ferent depending on which equalizer curve is se-
lected.

Note

You can store the adjusted equalizer curve in
CUSTOM by pressing and holding button 5 until
MEMORY appears in the display.

Adjusting 9-band graphic

equalizer

For CUSTOM equalizer curve, you can adjust

the level of each band.

1 Recall CUSTOM equalizer curve.

See Recalling equalizer curves on this page.

Digital Signal Processor

10

En

41

English

Section

Advertising