Pioneer SE DIR800C - Manual (Page 16)

02 Getting started
16
En
Note
! Infrared signals do not pass through
walls or opaque glass. Set the
transmitter in a location where there are
no obstructions between the transmitter
and headphones when used.
! Place the transmitter on a stable surface.
! Brightness of the infrared transmitter
indicator may vary. However, it does not
affect the transmission area.
The transmitter can be placed horizontally or vertically. Out of the box, it is set for horizontal
use.
Setting up vertically
Use a screwdriver to remove the two screws
fixing the stand to the bottom of the
transmitter.
Attach the top half of the vertical stand to
the base, as shown below.
Use the two screws to fix the transmitter to
the stand.