Operating this unit, Introduction of audio adjustments, Switching left and right channel – Pioneer DEH-80PRS User Manual

Page 19

Advertising

Introduction of audio adjustments

1 Audio display

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select AUDIO.

Turn M.C. to select the audio function.

After selecting, perform the following proce-
dures to set the audio function.
3-way network mode
BAL (balance adjustment)

—NW 1 (network

adjustment 1)

—NW 2 (network adjustment 2)

—NW 3 (network adjustment 3)—NW 4 (net-
work adjustment 4)

—POSI (position selector)

—TA1 (time alignment setting)—TA2 (time
alignment adjusting)

—LOUD (loudness)—

EQ 1 (graphic equalizer)

—EQ 2 (16-band gra-

phic equalizer)

—A.EQ (auto-equalizer on/off)

—ASL (automatic sound levelizer)—SLA
(source level adjustment)
Standard mode
F/B (balance adjustment)

—POSI (position se-

lector)

—TA1 (time alignment setting)—TA2

(time alignment adjusting)

—LOUD (loudness)

—EQ 1 (graphic equalizer)—EQ 2 (16-band
graphic equalizer)

—SW 1 (subwoofer on/off)

—SW 2 (subwoofer cut-off frequency)—SW 3
(subwoofer slope)

—F.HPF 1 (front high pass

filter slope)

—F.HPF 2 (front high pass filter

cut-off frequency)

—R.HPF 1 (rear high pass fil-

ter slope)

—R.HPF 2 (rear high pass filter cut-

off frequency)

—A.EQ (auto-equalizer on/off)—

ASL (automatic sound levelizer)

—SLA (source

level adjustment)

Press M.C. to display the setting mode.

# You can also switch between the audio func-
tions in reverse order by turning

M.C. counter-

clockwise.
# When selecting FM as the source, you cannot
switch to

SLA.

# When selecting OFF in TA1, you cannot
switch to

TA2.

# You can select SW 2 and SW 3 only when sub-
woofer output is turned on in

SW 1.

# To return to the display of each source, press
BAND/ .

Notes

! If you do not operate the audio function within

about 30 seconds, the display is automatically
returned to the source display.

! EQ 2 (16-band graphic equalizer), TA2 (time

alignment adjusting),

NW 1 (network adjust-

ment 1),

NW 2 (network adjustment 2), NW 3

(network adjustment 3) and

NW 4 (network

adjustment 4) functions are not canceled
automatically.

Switching left and right channel

You can adjust following functions for left and
right channel independently or commonly.

3-way network mode
! Adjusting network (NW 1, NW 2, NW 3)

! Adjusting the 16-band graphic equalizer

(

EQ 2)

Standard mode
! Adjusting subwoofer settings (SW 2)

! Adjusting low pass filter attenuation slope

(

SW 3)

! Setting the high pass filter for front speakers

(

F.HPF 1, F.HPF 2)

! Setting the high pass filter for rear speakers

(

R.HPF 1, R.HPF 2)

! Adjusting the 16-band graphic equalizer

(

EQ 2)

Use M.C. to select the audio function

described above.

Section

Operating

this

unit

Operating this unit

Advertising