Pioneer RMX-500 - Manual (Page 14)

Operating the RMX-500 Plug-in
Here we explain how to operate this software. Operation is basically the
same as on the RMX-500. The explanations in this section focus on the
functions specific to this software.
 RMX-500 Plug-in display screen
1
2
1 Settings button
This opens this software’s settings screen.
! Credits
Displays the trademark, version and the like of this software.
2 Link button
This sets so that the software can be operated from the RMX-500. For
details, see Connecting with the RMX-500 and operating the software.
 Connecting with the RMX-500 and operating the
software
This software can be operated from the RMX-500.
1 Connect the RMX-500 unit and the computer with
a USB cable, and check that the [Link] button in the
software is lit white.
2 When the [Link] button on this software is lit white ,
press the [Link] button to turn it blue.
! Multiple instances of this software can be activated simultaneously.
When multiple instances of this software have been activated, the
[Link] button on one instance only will turn blue, and can be oper-
ated from RMX-500. On all other instances, the [Link] button turns
white automatically, and the instance cannot be operated.
! This software can be used standalone to apply effects without con-
necting to the RMX-500.
En 14