Pioneer X-SMC11DAB-S - Manual (Page 7)

Part names and functions 02
7
En
10 Tuner control buttons
ST/MONO
Use to switch the sound mode between stereo and
monaural (page 22).
DAB SCAN
Use to scan for DAB radio station (page 23).
DAB ENTER
Use to confirm the DAB radio station (page 23).
DAB DISPLAY
Press to change the DAB display for information mode
(page 24).
11 CLOCK
Use for setting the clock (page 12).
12 TIMER
Used when setting the wake-up timer (page 13).
13 SLEEP
See Using the sleep timer on page 14.
14 Sound control buttons
Adjust the sound quality (page 13).
15 RANDOM
Randomize order of track playback from a CD, iPod or USB
(pages 18 and 20).
16 REPEAT
Press to change the repeat play setting from a CD, iPod or
USB (pages 18 and 20).
17 Volume control buttons
Use to set the listening volume (page 12).
18 DIMMER
Dims or brightens the display. The brightness can be
controlled in four steps (page 12).
Note
The BT AUDIO button is not available for this unit.
Using the remote control
The remote has a range of about 7 m at an angle of about 30º
from the remote sensor.
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the
remote and the remote sensor on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the unit’s
remote sensor.
• Remote controllers for different devices can interfere
with each other. Avoid using remotes for other
equipment located close to this unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote.
30°
7 m
30°
X-SMC11DAB-S_VXE8_En.book 7 ページ ２０１３年８月６日 火曜日 午前９時２５分