BT DF450 - Manual (Page 31)

28
Additional features
Adjusting for different-size paper
To send a different-size document
Your DF450 can send documents from
148 x 148mm up to 216 x 600mm in size. Adjust
the document feeder (if necessary) by moving
the side supports.
To receive a different-size document
The automatic sheet feeder is pre-set to take
A4 (210mm wide) paper, but can be adjusted to
take paper 216mm wide also.
• Press the FUNCTION button.
• Press the START button until the display
reads SIZE:
• Press the ᮤ ᮣ buttons to select between
SIZE:A4, SIZE: LETTER and SIZE: LEGAL .
• Press the START button to confirm your
selection.
• Press the STOP button to return the DF450
to standby.
To change the automatic sheet feeder
cassette to take different-size paper
Your DF450 automatic sheet feeder can hold
A4 (210mm wide) or Legal (216mm wide)
paper. Adjust the automatic sheet feeder (if
necessary) by moving the side supports.
• First remove the paper cover from the front
of the automatic sheet feeder.
• Insert a small coin into the small groove just
in front of the hinge, this will release the
hinge to allow you to pull out the cover.
• Insert a small coin in the groove at the
bottom of the automatic sheet feeder to
release the black side supports.
A4 I
Repeat this action for both sides of the automatic
sheet feeder.
A4 - 210mm wide, Legal and letter - 216mm wide.
L A4
START FUNCTION