Bryston SP1.7 - Manual (Page 21)

19
Explanation of ‘Saved Settings per Source’ Feature
The SP1.7 will remember different mode settings for each source. Every time a source is engaged it will recall
the following settings:
Digital Status
Listening Mode (Surround, THX, Stereo, Mono)
Surround Mode
Bypass Status
Subwoofer Level
Rear Channel Levels
Back Channel Levels
Speaker Configuration
EX Control
ES Control
To save these settings, make the preferable mode changes and adjustments per source, then press the SAVE
button on the SP1.7 remote control before switching to another input.
NOTE 1: You must set the speaker configuration manually for each input, within the LCD setup menu.
NOTE 2: The Setup Test Noise mode will overwrite Rear and Sub level settings for ALL inputs.
Setting the Speaker Configuration
Before calibrating levels you must first tell the SP1.7 about your loudspeaker configuration. To do this:
1. First enter the main menu by pressing on any one of the menu buttons (< - > or SELECT).
2. Next move the cursor to “SP”. Hit ‘SELECT’ - You are now in the Speaker Menu.
3. Move the cursor to the speaker(s) you want to change the configuration for using the arrow keys (LR, C,
SUR, BK, SUB). Hit ‘SELECT’.
Figure 14: Highlight “LR” in the Speaker Menu
Figure 13: Highlight “SP” in the Setup Menu