Brocade Communications Systems Brocade ICX 6650 - Manual (Page 19)

Brocade ICX 6650 Administration Guide 1
53-1002600-01
1
Management Applications
In this chapter
• Management port overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Logging on through the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
• Using slot number, and port number with CLI commands . . . . . . . . . . . . . . . 5
Table 1 lists the Brocade ICX 6650 switch and the management application features the switch
supports. These features are supported in full Layer 3 software images.
12
Management port overview
The management port is an out-of-band port that customers can use to manage their devices
without interfering with the in-band ports. The management port is widely used to download
images and configurations and for Telnet sessions.
How the management port works
The following rules apply to management ports:
• Only packets that are specifically addressed to the management port MAC address or the
broadcast MAC address are processed by the Layer 2 Switch or Layer 3 Switch. All other
packets are filtered out.
• No packet received on a management port is sent to any in-band ports, and no packets
received on in-band ports are sent to a management port.
• A management port is not part of any VLAN
• Protocols are not supported on the management port.
TABLE 1 Supported management application features
Feature Brocade ICX
6650
Management port Yes
industry-standard Command Line
Interface (CLI), including support for:
•
Serial and Telnet access
•
Alias command
•
On-line help
•
Command completion
•
Scroll control
•
Line editing
•
Searching and filtering output
•
Special characters
Yes