BBE DI-400 - Manual (Page 6)

REAR PANEL
FUSE
Replace as needed
with specified size
and type.
XLR OUTPUT CONNECTOR
The XLR output of the DI-400 is
balanced. The XLR output is used for
running from the DI-400 directly to
the input of a mixing console.
XLR Pin configuration:
Pin 1 = Ground, Pin 2 = Positive and
Pin 3 = Negative.
1/4” UN-BALANCED
INPUT CONNECTOR
The 1/4” input connector
is wired in parallel with
the front panel input and
thru jacks.
GROUND LIFT PUSH BUTTON
When in the “lift” position (in) Pin 1 of
the balanced XLR output (ground) is
disconnected.
6