Bowens QUAD BW-7620 - Manual (Page 3)

Introduction
Safety Notes
3
10
DO NOT
:
• Use in an environment where moisture or flammable vapor is likely to come in contact with the
pack or the flash heads.
• Plug or unplug flash heads without first switching power of
f.
• Restrict air vents while in use. • Use a unit with damaged housing, moldings, flash tube or modelling lamp.
If the unit is dropped or damaged in any way
, always have it checked out before using.
• Operate the unit without a safe grounded
AC supply
.
DO:
• Switch power of
f and disconnect from the supply before changing modelling bulb or flash tube.
• Observe the
AC power supply requirements.
• Ensure that the flash head cable locking rings at the power pack or adapters are fully
locked before use.
•
A
void placing cables where they can be tripped over
. Protect from heavy
, sharp or hot objects,
which may cause damage and replace damaged cables immediately
.
• Unplug the power pack from the electrical outlet when not in use. • Remove the power cord by gripping the plug. NEVER pull the cord. • Ensure that any extension cord used has a suitable current rating to prevent overheating.
NEVER use coiled extension cords.
•
AL
W
A
YS remove the flash head covers before using.
Dear V
alued Customer
,
Thank you for choosing the Bowens QUAD2400 professional flash system. Accurate, ergonomic, powerful and simple to use, the QUAD2400 power pack was designed by working closely with photographers to develop a flash that meets the standards demanded in professional studios today
.
Heads and accessories from the QUAD range can be used with the QUAD2400 power packs. For details of all related products, please contact your local distributor
, a list of which can be found at
www
.bowensinternational.com.
In order to obtain the full benefit from your purchase, please take a few moments to familiarise yourself with this user manual. Thank you. Bowens International Ltd.
QU
AD
2400
Number of Channels Number of Head Sockets Symmetric/Asymmetric Master Power Control Independent Channel V
ariators
Power Level Display Flash V
oltage Stabilization
Supply V
oltage
Flash Ready Indication Overload Protection Sync V
o
ltage (Max.)
Photocell Audio Ready Signal Modelling Lamps Modelling Modes Recommended Flash Head Dimensions (l x w x h) Stored Energy (Max.) Flash Power Control Range T
ypical Recycle
T
ime
(Full Power) Guide Number (Full power
, 50° Keylite, ISO 100)
Flash Duration (t=0.5) (One Head, Max. V
ariator)
Flash Colour
T
emperature
W
e
ight
www
.bowens.co.uk
www
.bowens.co.uk