Brother HL 2040 - Manual (Page 27)

25
The Brother print server is equipped with a web server that allows you to monitor its status or
change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).
If you wish to reset the print server back to its default factory settings (including password),
please follow these steps:
1
Turn off the printer.
2
Make sure that the front cover is closed and the power cord is plugged in.
3
Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until
the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner,
Drum and Paper LEDs are off.
4
Press the Go button six times. Make sure that all the LEDs light up when the print server has been
reset to its default factory settings.
The Printer Settings Page lists all the current printer settings, including network settings. To
print the Printer Settings Page, press the Go button three times.
Web browser
The User Name is 'admin' and the default Password is 'access'. You can use the web browser to
change this password.
Network User's Guide Chapter 2.
Network Factory Default Setting
Print the Printer Settings Page
Setting Up
Your Printer
W
ind
ows
®
USB
W
indo
ws
®
Pa
ralle
l
Win
dows
®
Network
Macintosh
®
US
B
Macintosh
®
Network
Installing the
Printer Driver
Fo
r
Administrators