Behringer Virtube VT100FX EN - Manual (Page 4)

Page 4 of 7 Page 4 of 7
If your gig calls for a bit more volume, may we
suggest the VT30FX — with its 30-Watts of output
power and rugged, vintage 10" BUGERA speaker,
you will be the “Master of Tone!”. You get the same
great-sounding digital effects section mentioned
above, which features four reverbs, four delays,
four chorus and four flanger presets — plus a
footswitch for channel-switching and FX on/off.
The VT30FX also includes additional tone-shaping for
the Clean channel via separate, dedicated Bass and
Treble controls.
The VT50FX comes loaded for tone, with Bass and
Treble controls on the Clean channel and a dedicated
3-band EQ, plus our radical Contour control on the
Overdrive channel — allowing you to sweep the
mids to dial in your perfect sound. The 16 onboard
digital effects are switching on/off via the included
footswitch, which also toggles between the two
channels. There's also a dedicated FX Loop so you can
inject your sound with your personal favorite external
effects. With 60-Watts (we know the name says 50,
but we think more is always better!) and a custom-
engineered 12" BUGERA speaker, the VT50FX stands
out in a crowd.
VT30FX
VT50FX
Clean channel
Volume control,
Bass control,
Treble control
Input
jack
Channel select
switch with LED
indicators for Clean
and Overdrive
channels
FX Level — Determines
amount of selected
effect is applied to
signal (both channels)
Overdrive
channel Gain,
Bass, Contour,
Treble, Volume
FX Preset selector
— 16 factory presets
for reverb, chorus,
flanger and delay
(both channels)
VTC
switch
CD IN/LINE OUT A — Dual-
purpose jack connects output
of CD/Tape/mp3 deck to amp or
sends signal to external amp or
mixer (no speaker simulation)
PHONES/LINE OUT
B — Dual-purpose jack
connects headphones
for private listening or
sends signal to external
amp or mixer (with
speaker simulation)
Footswitch
jack
Input jack Channel select switch
with LED indicators
for Clean and
Overdrive channels
Clean channel
Gain, Bass, Middle,
Treble control
Overdrive
channel Gain,
Contour, Treble,
Volume control
FX Preset selector —
16 factory presets
for reverb, chorus,
flanger and delay
(both channels)
FX Level —
Determines amount
of selected effect
is applied to signal
(both channels)
REVERB Level
controls additional
reverb effect
Master
Volume
VTC
switch
PHONES/LINE OUT B —
Dual-purpose jack connects
headphones for private listening
or sends signal to external amp or
mixer (with speaker simulation)
VIRTUBE
VT250FX/VT100FX
VT100FXH/VT50FX
VT30FX/VT15FX
VT15CD