When writing or rewriting – Toshiba Equium P300 User Manual
Page 92
User’s Manual
4-19
Operating Basics
■
Before you enter Sleep Mode/Hibernation Mode, be sure to finish DVD-
RAM writing. Writing is finished if you can eject DVD-RAM media.
■
Be sure to close all other software programs except the writing
software.
■
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■
Operate the computer under the power scheme High Performance. Do
not use power-saving features.
■
Do not write while virus check software is running. Wait for it to finish
and then disable virus detection programs including any software that
checks files automatically in the background.
■
Do not use hard disc utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
■
Write from the computer's hard disc drive to the CD/DVD. Do not try to
write from shared devices such as a LAN server or any other network
device.
■
Writing with software other than TOSHIBA Disc Creator is not
recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
-RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
■
Do not perform any of the following actions when writing or rewriting:
■
Change users in the Windows
®
Vista operating system.
■
Operate the computer for any other function, including using a
mouse or TouchPad or closing/opening the LCD panel.
■
Start a communication application such as a modem.
■
Apply impact or vibration to the computer.
■
Install, remove or connect external devices, including the following:
ExpressCard, USB devices, external display, optical digital devices.
■
Use the audio/video control buttons to reproduce music or voice.
■
Open the DVD Super Multi drive or HD DVD-ROM drive.
■
Do not use shut down/log off and Sleep Mode/Hibernation Mode while
writing or rewriting.
■
Make sure writing or rewriting is completed before going into Sleep
Mode/Hibernation Mode. Writing is completed if you can open the DVD
Super Multi drive tray or HD DVD-ROM drive tray.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.