Toshiba Satellite L550 User Manual

Page 62

Advertising
background image

3-12

User’s Manual

L550/L555/L550D/L555D

Restoring the pre-installed software from your created
Recovery Discs

If the pre-installed files are damaged, you are able to use the Recovery
Discs you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, follow the steps
below:

1. Load the Recovery Discs into the optical disc drive and turn off the

computer’s power.

2. While holding down F12 key on the keyboard, turn on your computer -

when the

TOSHIBA

logo screen appears, release the F12 key.

3. Use the cursors key to select the CD-ROM icon from the menu.

4. A menu will be displayed from which you should follow the on-screen

instructions.

Restoring the pre-installed software from the Recovery
hard disk drive

On your Data drive you may find a folder “HDDRecovery”. This folder
stores files which can be used to recover your system to the originally
installed factory state.

If you subsequently set up your hard disk drive again, do not change,
delete or add partitions in a manner other than specified in the manual,
otherwise you may find that space for the required software is not available.

In addition, if you use a third-party partitioning program to reconfigure the
partitions on your hard disk drive, you may find that it becomes impossible
to setup your computer.

1. Turn off the computer.

2. Turn on the computer and when the TOSHIBA screen appears

repeatedly press the F8 key.

When the sound mute feature has been activated by pressing the
Fn + ESC key, be sure to disable this to allow sounds to be heard before
starting the restore process. Please refer to Chapter 5,

The Keyboard

, for

further details.

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.

When the sound mute feature has been activated by pressing the
Fn + ESC key, be sure to disable this to allow sounds to be heard before
starting the restore process. Please refer to Chapter 5,

The Keyboard

, for

further details.

Be sure to connect the AC adaptor, otherwise you may run out of battery
during the recovery process.

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.

Advertising
This manual is related to the following products: