Connecting external equipment, English – Toshiba BL712 User Manual

Page 10

Advertising
background image

English - 9 -

English

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................
Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential
that the scart cable is connected to the TV.
Before running fi rst time installation, any connected devices
need to be set to standby mode.
The DIGITAL AUDIO socket enables the connection of a
suitable surround sound system.
HDMI

®

(High-Defi nition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-defi nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this TV is able to connect to HDMI equipment,
it is possible that some equipment may not operate correctly.

You can use YPbPr to VGA cable (not supplied) to enable
YPbPr signal via VGA input.
WARNING: You cannot use VGA and YPbPr at the same
time.
A wide variety of external equipment can be connected to the
TV; therefore, the relevant owner’s manuals for all additional
equipment must be referred to for exact instructions.
If the TV automatically switches over to monitor external
equipment, return to normal TV by pressing the desired pro-
gramme position button. To recall external equipment, press
SOURCE button repeatedly to switch between sources.
Regardless of source’s property, audio output from the DIGI-
TAL AUDIO socket cannot be copied.

HDMI Input

Socket

RGB/PC

Input

SCART

Socket

Aerial

Input

TV

* a decoder

could be Digital

Satellite, Free to

Air or any other

compatible

decoder.

decoder*

COMMON INTERFACE

The Common Interface is
for a Conditional Access
Module (CAM).

USB Input

DIGITAL AUDIO

Socket

Side View

Headphone

SIDE AV

Menu Wheel

MODE

o

H

D

M

I1

SPDIF

Coax.OUT

01_MB62_[GB]_DVB_TC_(IB_INTERNET)_(22145LED_3910UK)_BRONZE19_10081092_10079982.indd 9

01_MB62_[GB]_DVB_TC_(IB_INTERNET)_(22145LED_3910UK)_BRONZE19_10081092_10079982.indd 9

13.10.2012 14:25:25

13.10.2012 14:25:25

Advertising