Common interface, Software upgrade and licences, Searching for new software – Toshiba M6363 User Manual

Page 75: Network upgrade, Searching for new software network upgrade

Advertising
background image

75

Engl

ish

CONTROLS AND FEATURES

The Common Interface Slot, situated on the side of the

television, enables the insertion of a CAM (Conditional

Access Module) and card. These are purchased from a

service provider and allow additional subscription

broadcasts to be viewed. For information, see a service

provider.

a

Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.

b

Press

and

B

/

b

to highlight Installation

icon.

c

Press

c

and

B

/

b

to select DTV Settings and

press OK.

d

Press

B

/

b

to select Common Interface and

press OK.

e

Details of the CAM should now be available.

NOTE:
• Software update of a CI Plus CAM may execute

automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.

• Some CI or CI+ CAM may not be supported.

• CI+ operation is not guaranteed except for Canal Ready

DTT services on suffix FC models.

Software Upgrade and
Licences

If preferred, software upgrades can be searched for

manually using Search for New Software.

a

In the Get Help menu, press

B

/

b

to select

Software Upgrade and press OK.

b

Press

B

/

b

to select Over-the-air Upgrade and

press OK.

c

Press

c

and

B

/

b

to select Search for New

Software and press OK. The television will
automatically start searching for a software
upgrade, the progress bar will move along the line.

If an upgrade is found, the television will
automatically start downloading. If not, a screen
will appear stating that an upgrade is unavailable.

NOTE: When Auto Upgrade is set to Off, this feature is
not available.

TOSHIBA may offer upgrades for the TV’s software in the

future. The TV’s software is upgraded via the Network.

Before downloading software:

Configure your TV to connect to the Internet.

NOTE: While the upgrade is being performed, you will not
be able to watch the TV.

a

In the Get Help menu, press

B / b to select

Software Upgrade and press OK.

b

Press

B / b to select Network Upgrade and press

OK.

NOTE: If the network is not available, a warning
message will appear.

c

The TV software upgrade will start when download
succeeds.

Common Interface

Searching for New Software

Network Upgrade

SEARCH FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.

48 %...

CH 31

Advertising