Toshiba TV743 User Manual

Page 16

Advertising
background image

16

SETTING UP YOUR TV

En

glish

You must allow the television to complete the search.

When the search is complete, the television will
automatically select position one.

The Auto Tuning screen will display the total number
of services found.

l

Press

C

or

c

to view the DTV (digital channel) or ATV

(analogue channel) lists.

m

Use

B

or

b

to move through the list to select a

channel, and then press

Q

to view.

In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/RADIO/TEXT, DTV Cable
TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available)
modes.

NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.

Select Next and press

Q

. The Satellite Settings

screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” section on page 17.

Highlight Done and press

Q

.

If your satellite dish is movable, the following
Positioning screen will appear.

Press

B

or

b

to highlight Positioning, and then press

C

or

c

to find the dish position with the strongest

signal level.

Press

B

or

b

to highlight Store Position and press

Q

to store the dish position. Repeat steps 14 and 15

for the next satellite as necessary.

If your satellite dish is not movable, the Positioning
screen will not appear.

Adjust the dish position manually for the maximum
Signal Level strength.

Highlight Done and press

Q

.

If the reception testing completes successfully, the
Auto Tuning startup screen will display.

You can select Scan Option from Free to Air and All.

Press

B

or

b

to highlight Start Scan, and then press

Q

.

The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.

When the search is complete, the Auto Tuning results
screen will display the total number of services found.

Use

B

or

b

to move through the list to select a

channel, and then press

Q

to view.

Auto Tuning

Progress

Found

ATV Tune

Waiting...

Channel: C7

DTV Tune

3%

2

Satellite

No.

Dish

LNB

ASTRA 19.2˚E

Satellite Settings

1

4

3

2

1

1

Transponder : 1/83 (10743 MHz)
Dish Type : Movable
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600

Switch Type

None

LNB Power

On

Done

PLEASE NOTE

The Reset TV menu can also be accessed at any
time from the SETUP menu.

Positioning

Signal Level

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

W

E

Go to 0

Satellite : ASTRA 19.2°E

Step Size

1

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA(19.2°E)

Scan Option

00GB03Tune.fm Page 16 Tuesday, August 17, 2010 4:03 PM

Advertising
This manual is related to the following products: