Dialing properties, Connecting – Toshiba SATELLITE U400 User Manual

Page 87

Advertising
background image

User’s Manual

4-26

Operating Basics

Dialing Properties

Select this item to display the dialing properties.

Connecting

To connect the modem cable, follow the steps below.

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem

If you are using the computer in Japan, the Telecommunications Business

Law requires that you select Japan region mode. It is illegal to use the

modem in Japan with any other selection.

The modular cable that comes with the computer must be used to

connect a modem. Connect the end of the modular cable with the core

to the computer.

In case of a lightning storm, unplug the modem cable from the

telephone jack.

Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Do not pull on the cable or move the computer while the cable is

connected.

If you use a storage device such as an optical drive or hard disk drive

connected to a 16-bit PC Card, you might experience the following modem

problems:

Modem speed is slow or communication is interrupted.

Skips may occur in sound.

Advertising
This manual is related to the following products: