Blaupunkt AntaresT60 - Manual (Page 29)

29
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Automatic answer
In the Setup menu, you can make a setting
so that all incoming calls are answered auto-
matically.
➮
In the telephone mode, press OK.
The DSC menu will appear. The cursor will
mark
Setup .
➮
Press OK.
➮
Press to select Auto. answer .
➮
Press OK.
The AUTOMATIC ANSWER menu will ap-
pear in the display.
➮
Press to select the desired setting On
or Off .
➮
Press OK.
You will return to the Setup menu.
Rejecting a call
If you do not want to answer a call,
➮
press CLR while the phone is ringing.
The caller will hear a busy signal.
Switching the microphone to
mute
During a call, you can switch the microphone
to mute.
➮
Press AUDIO.
Mute On will appear in the display.
Switching off the mute function
➮
Press AUDIO again.
Mute Off will appear briefly in the display.
Redial
You can have a number redialled from the list
of the numbers called last. For more informa-
tion, refer to the section on “Dialling telephone
numbers from the list of the last calls made”
in this chapter.
Automatic redial
In the Setup menu, you can make a setting
so that the number is redialled automatically
until the call goes through.
➮
In the telephone mode, press OK.
The DSC menu will appear. The cursor will
mark
Setup .
➮
Press OK.
➮
Press to select Auto. redial .
➮
Press OK.
The AUTOMATIC REDIAL menu will appear
in the display.
➮
Press to select the desired setting On
or Off .
➮
Press OK.
You will return to the Setup menu.
Ending the automatic redial function
➮
Once the dialling process has begun,
press
to end automatic redial.
Call waiting (2nd call on hold)
During a telephone call, you can also accept
a second incoming call. The first caller will
then be put on “hold”.
Note:
It might be necessary to order “Call waiting”
service from your provider. Your service pro-
vider has more detailed information.
Answering the 2nd call
If you receive a second call while you are al-
ready using the telephone, you will hear a sig-
nal; if you want to answer the 2nd call,
➮
press OK.
The first caller will be put on “hold”.
Rejecting the 2nd call
➮
Press CLR.
The caller will hear a busy signal.
USING THE TELEPHONE