Toshiba Satellite Pro U400 - Manual (Page 71)

User’s Manual 4-16
Operating Basics
Using the optical disc drive
Operation is the same for all optical media drives. The full-size drive
provides high-performance execution of CD/DVD-based programs. You
can run either 12 cm (4.72") or 8 cm (3.15") CDs without an adaptor. An
ATAPI interface controller is used for CD/DVD operation. When the
computer is accessing a CD/DVD, an indicator on the drive glows.
Refer also to the
Writing CD/DVD with the DVD Super Multi drive section
for precautions on writing to CD/DVD.
Loading discs
To load a disc, follow the steps below and refer to the figures.
1. a.
When the power is on, press the eject button to open the drawer
slightly.
Pressing the eject button
b. Pressing the eject button will not open the drawer when the disc
drive's power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Eject Button