Customizing the function settings (continued), Setting details, Set password – Toshiba SD590 User Manual

Page 36: Use default settings, Parental control

Advertising
background image

36

Function setup

Customizing the Function Settings (continued)

Setting details

Set Password

New Password can be set to replace the default password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the / button to select Set

Password.

4) Press ENTER button. “Enter Password” screen will

appear.

5) Press the number buttons to input the current

password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.

6) Press ENTER button again, “New Password” screen will

appear. Press the number buttons to input the new
password.

7) Press ENTER button, “Confirm Password” screen will

appear. Enter the same password again for confirmation.

8) Press ENTER button. Now your new password has been

set. Be sure to remember this number!

If you forget the password, you can erase your

current password by pressing number button 8

on the remote control four times, then press

ENTER button to confirm the setting.

PASSWORD: 8888

DVD

Misc

Use Default Settings

If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then

press ENTER button.

4) Press / button to select “Yes”, then press ENTER

button. The original setting will be restored.

Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.

4) Press “8888” using number buttons. (Please note, this

is presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.

Enter Password:

Set Password

Parental Control

: 8. Adult

The parental lock level is equivalent to the following
ratings:

Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13

5) Press / to select the rating from 1 to 8. Rating one

(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.

6) Press OPEN/CLOSE button to activate the Parental

Level setting.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER
button, “Enter Password” screen will appear. Input the 4-
digit password as you have set then followed by ENTER
button and playback will start. If “NO” is selected, press
the OPEN/CLOSE to remove the disc.

Notes
• If you input a wrong password, press CLEAR button

and re-enter your 4-digit password again.

• You cannot play DVDs rated higher than the level you

selected unless you cancel the parental lock function.

Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult

Parental Control

DVDs equipped with the password function are rated
according to their content. The contents allowed by a
parental lock level and the way a DVD can be controlled
may vary from disc to disc.
For example, if the disc allowed, you could edit out
violent scenes unsuitable for children and replace them
with more suitable scenes, or you could lock out
playback of the disc altogether.
• DVDs may or may not respond to the parental lock

settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.

1) Press SETUP button.
2) Press / to select Rating.
3) Press button to select Parental Control, then

press ENTER button. “Enter Password” screen will
appear.

DVD

Screen saver

: On

HDMI CEC

: Off

Screen saver

: On

Do you want to use default setting?

Advertising