Toshiba Satellite 2650 - Manual (Page 154)

10-18 Troubleshooting User's Manual
Satellite 2610/2650 User's Manual – 10CHAP.DOC – ENGLISH – Printed on 19/09/99 as 10_261UK
Choosing test options
Before the test begins, you are prompted to select whether to test the
following components. To select the test, type
Y at the prompt,
otherwise type N .
Component Prompt
Diskette drive Test the FDD (Y/N)?
This test writes patterns to the diskette. Use a
formatted, write-enabled diskette. Data on the
diskette will be destroyed.
Hard disk drive Test the HDD (Y/N)?
This test writes a small amount of data to the
hard disk.
Printer Test the Printer (Y/N)?
Before executing this test, make sure the printer
is connected and turned on.
If you select Y , the following prompt will appear:
Compatible with IBM printer (Y/N)?
Select Y for IBM compatible and N for non-
compatible. If you are not sure, select N .
Selecting Y for a non-compatible printer may
result in garble and processing of excess pages.